What to Expect When You Get a Sprinkler System Installed in Henry County

If you've never had an irrigation system installed before, the process can feel like a black box. You know you want one, but you're not sure what it involves, how long it takes, or what your yard is going to look like when it's done.

Here's exactly what to expect when you work with us — from the first call to the moment we hand you the controller.

Step 1: The consultation

Before anything gets scheduled, we come out to your property for a free on-site consultation. This isn't a sales pitch — it's a working visit.

We walk the yard with you, look at your lawn layout, garden beds, and any obstacles (trees, walkways, slopes), and check your water pressure and meter size. All of that goes into the zone design.

By the end of the consultation, you'll have a clear picture of what the system will look like, how many zones it will cover, and what the install involves. No surprises later.

Step 2: Scheduling

Once you're ready to move forward, we get you on the calendar. We give you a specific date and a realistic time window — not a vague "sometime next week."

For most residential lots in Henry, Spalding, and Butts County, the install is a one-day job. We'll let you know if your property is larger or more complex and might need a second day.

Step 3: Install day

On the day of the install, our crew arrives and gets to work. Here's what happens:

Trenching. We cut narrow trenches through your yard to lay the supply lines. We use equipment sized for residential work — the trenches are clean and the disruption to your lawn is minimal.

Pipe and head installation. We lay the supply lines, install the sprinkler heads at the right spacing and height for your grass type, and connect everything back to your water supply.

Controller installation. We mount and wire the irrigation controller — typically in your garage or on an exterior wall — and program the initial schedule based on your lawn's needs.

Testing. Before we leave, we run every zone and check every head. If anything isn't performing right, we adjust it on the spot.

Step 4: The walkthrough

When everything is running correctly, we walk you through the system. We show you how to adjust the schedule, how to run a manual cycle, and what to do if a head gets knocked out of alignment.

We also talk through winterization — in Georgia, you'll want to blow out the lines before the first hard freeze, and we can schedule that service for you in advance.

What your yard looks like afterward

The trenches are backfilled and tamped down. You'll see some soil disturbance along the trench lines, but it fills in quickly — usually within a few weeks of normal watering and growth. We do our best to minimize disruption to existing landscaping.

How long does it take?

Most residential installs in our service area are completed in a single day. Larger lots or more complex layouts may take two days. We'll give you an honest estimate during the consultation.

Ready to get started?

End-of-season install slots are open now through October 31. Fall is the right time to do this — the ground is still workable, the schedule is more open, and your system will be ready to go when spring arrives.

Book your free consultation before the season closes — we're based in McDonough and serve Henry, Spalding, and Butts County.